SHIPPING EVERYWHERE !!! |
Pad Measurements
Clarinets
Flutes
Piccolos
Saxophones
SAXOPHONE PAD MEASUREMENT
There are two methods that can be used to measure your instrument for the correct sizes of pads. They are (1) Measuring the pads and (2) Measuring the pad cups. See the sections below to determine which method you will use.
MEASURING PADS
Saxophone pads are always measured at the widest point of the pad.Use a ruler with millimeter marks and measure the saxophone pad across the surface at the widest point. It's that simple.
Measuring in this manner is the easiest way to proceed. In doing this, you are assuming that the previous installer put the correct size of pads on the saxophone.
MEASURING PAD CUPS
If you would prefer to measure the pad cups, you will need to measure to the inside of the saxophone pad cup. Use this method if pads are missing or seem to be the wrong size for the saxophone.SIZES
All measurements should be taken to the closest 1/2 millimeter measurement. Always round down if you are not sure.We will need measurement "C" from the diagram below:
If you are ready, you may go directly to Order Sax Pads
Home | Buy Pads and Supplies |
Pad Measurements : Clarinets Flutes Piccolos Saxophones
Product Installation: Clarinets Flutes Piccolos Saxophones
Tenon Joint Cork
Clarinet Repad/Reconditioning | Our Pads | Supplies | FAQ | Policies | Contact Us | Clarinet Info | Used Instruments |
